Archive for March, 2011
Wednesday, March 23rd, 2011
 |
| |
| Base Flatness & Machine Alignment |
| |
| Join us for a Webinar on April 7 |
| |
 |
| |
Space is limited.
Reserve your Webinar seat now at:
https://www1.gotomeeting.com/register/266789881 |
| |
Presented by Paul Berberian, National Sales Manager, Alignment Supplies, Inc and John Lambert, President, Benchmark PdMStress! If you have it, you need relief. Here’s how to get it…
Stress is a killer, not only for people, but also for plant machinery as well. Let’s face it; the most important issue in the maintenance process is the machine unit’s installation. It comes before vibration, before oil analysis and infra red, even before ultrasonics. These technologies are used to detect the problems that a poor installation will create. There are many road blocks on the road to a good machinery installation job. This webinar provides information on one of the least known critical problems: Machine stress caused by distorted or twisted bases. We will provide information on how to find it, how to measure it and how to correct it.
Learning Point Takeaways
1) How base distortion causes stress in rotating equipment
2) Why base flatness is important
3) How to measure and correct base flatness
|
| |
| Title: |
|
Base Flatness & Machine Alignment |
| |
| Date: |
|
Thursday, April 7, 2011 |
| |
| Time: |
|
3:00 PM – 4:00 PM EDT |
|
| |
| After registering you will receive a confirmation email containing information about joining the Webinar. |
| |
System Requirements
PC-based attendees
Required: Windows® 7, Vista, XP or 2003 Server |
| |
Macintosh®-based attendees
Required: Mac OS® X 10.4.11 (Tiger®) or newer |
| |
|
|
 |
 |
|
|
|
| |
Posted in Uncategorized | Comments Off
