Testimonials

Sure, we say that Easy-Laser^® systems are the best value, best quality, and most durable systems available.  But why take our word for it?  Check out some of our Testimonials below:

“You have a great unit.  The best thing I like about it is accuracy, consistency and ease of use. 

We use it for horizontal alignment and softfoot.  It's a very dependable unit.  I have used several other laser alignment units and the Easy-Laser^® is by far the best I have used. Not all the pretty 3D screen pictures, colors, bells and whistles - just a very good tool that does the job fast and does it right!”
 
Mike Chelette
Procter & Gamble

“Once we align a pump, drive line, etc., we don’t have to second-guess the machine’s ability to be done right the first time…
 
We are spoiled with this unit compared to the last unit from another vendor that was a joke.” 
     
Dennis Hines
Potlatch

“The use of our Easy-Laser^® over the past couple years has really given our company an edge in that we can show up on-site and, in most cases, have a motor aligned, secured and running in less time than it would take the millwrights to get their unit set up. 
 
With little experience on the Easy-Laser^®, [a new employee] was able to get the job done with no problems and the customer was very pleased.” 
      
Charles Scott
VIS

“It is one of the few critical tools we use that lives up to the promise.”

Joe Scaff 
US Gypsum

“We looked at 3 other Laser Alignment tools before making the purchases.
 Easy-Laser^® stood out in the following categories:

• Software / reporting capabilities.
• Very little training required.
• Support - we have destroyed a couple of them, repair time & cost was minimum.
• You can pick it back up after 3 months of not using it, and not have any problems.”

North American Stainless

"We have done about 15 jobs with our Easy-Laser^® D480 thus far and have had great results.  I had one Technician that was dead set on the old way with dial indicators, so I talked him in to letting me come in behind him and check it after he was done - and found that at best he was still out 8 thou.  He now only wants to use the Easy-Laser^®!

I also have proven our alignment with a few engineers and come out on top because of the way we can document and show our results. Again I can't thank you enough for the support we got from Alignment Supplies and Dennis Mullins of PdM Technologies, who came out and did an excellent job of showing our team how to use the laser.  I would recommend you all and will to anyone that is thinking of making this type of investment.  The peace of mind is worth it all." 

David Tiller
Shoffner Kalthoff Mechanical Electrical Service

“I have used the Easy-Laser^® system for a few years now. The system is user friendly for the experienced veteran as well as the novice technician. Having your own technicians perform alignments brings a valuable vested interest in their equipment. Initially, we purchased the systems for larger 700hp and up applications. However, in a short time we found our associates requesting to perform alignments on other assets as well.

This is where the value comes in – when you have a system that gives people the tools and confidence to be effectively self-motivated. In a business with multiple locations, the system is cost effective enough to have different technicians operate the same equipment to bring standardization to your regional, national, or global program. I consider the Easy Laser system to be a valuable part of an effective condition-based reliability program and would recommend it to anyone."      
     
Jessy Collins
Airgas

"We have done about 15 jobs with our Easy-Laser^® D480 thus far and have had great results.  I had one Technician that was dead set on the old way with dial indicators, so I talked him in to letting me come in behind him and check it after he was done - and found that at best he was still out 8 thou.  He now only wants to use the Easy-Laser^®!

I also have proven our alignment with a few engineers and come out on top because of the way we can document and show our results. Again I can't thank you enough for the support we got from Alignment Supplies and Dennis Mullins of PdM Technologies, who came out and did an excellent job of showing our team how to use the laser.  I would recommend you all and will to anyone that is thinking of making this type of investment.  The peace of mind is worth it all." 

David Tiller
Shoffner Kalthoff Mechanical Electrical Service

"I started shopping for a laser tool in January of 2010 on the internet . I didn't realize there were so many brands. I spoke with Alignment Supplies and was referred to their local sales rep - we talked back and forth a couple of times and we were talking about the Easy-Laser^® D450 model. The deal was about complete when another company approached me about theirs. Needless to say I went the other route, and the cost was about the same.

I went offshore to do an alignment job and startup a generator package. Our facility in another area had sent their Easy-Laser^® tool to the rig for their mechanic to do the job , but he got held up somewhere else and couldn't make it. I got there and got my laser tool setup and started doing the alignment. I had a lot of issues with it, and I got pretty frustrated after several hours and removed my laser tool and got the Easy-Laser^® tool . I started reading the instructions and setting it up - the instructions were so plain and simple that I was finished with the alignment job in approx. 2 hours. This was the first time I had ever touched the Easy-Laser^® tool.

I would recommend anyone to get this D450 to start out with. It's a pretty big investment for an individual mechanic to make, but in the long run, it's worth every penny. The instructions and operations are so plain and simple. I am really looking forward to using the Easy-Laser^® alignment system."

Want more Testimonials?  Click below!

Easy-Laser Testimonial