Easy-Laser^® alignment tools are an all-in-one solution for true precision alignment. From the foundation to the precision alignment of shafts, Easy-Laser^® has a solution for your application.   

Foundation flatness

Any good alignment starts with the foundation. A good foundation can help eliminate soft foot from the start. Poor foundations can cause machine frames to twist even if the machines are properly aligned.

Read about Measuring Twist with Easy-Laser.

Bearing Play

Use the Easy-Laser^® Values Program to perform lift checks to detect bearing play. Excessive bearing play can prevent precision alignment. Bearing play looseness should be less than 2 thou.

Soft foot

Soft foot is one of the most prevalent conditions found in rotating machinery. This condition, if not corrected makes an alignment job much more difficult and, sometimes, impossible. If the internal alignment is not correct, the external alignment won’t matter.

Read about Soft Foot

Bent Shaft Check

Use the Easy-Laser^® Values Program and the Validity Rule measurement to check for bent shafts. A bent shaft will affect repeatability and make precision alignment more difficult.

Read about the Validity Rule

Vibration Level Testing

Once a problem has been identified you can use an overall vibration reading to determine the severity. A reading taken after the alignment is complete can verify that the job has been properly done and help identify other problems that may exist in the machine.

Find out more about the Easy-Laser^® Vibrometer.

Precision Laser Alignment

Easy-Laser^® provides solutions for every shaft alignment application:

• Horizontal shafts
• Vertical shafts
• Cardan shafts
• Machine Train – up to 10 couplings

See all of our laser shaft alignment solutions or contact us today!